Using Luna
66
©2019 CAE 905K560252 v1.0
CAE
Luna
To control the volume and specific sound played at a sound location, use the
Sounds
controls on Maestro.
3. To turn the StethoSym off, press the power button.
Up to eight (8) StethoSym's may be used with a single simulator and with different manikins. To pair a
StethoSym with a new manikin, place a powered StethoSym speaker module over a sound location
on the new simulator. Once placed, the StethoSym connects automatically to the new simulator.
Note:
StethoSym only works with CAE Luna when the manikin is running in the wireless mode with
the tablet. If the manikin is plugged into the tablet, the StethoSym will not function.
Charging the StethoSym
To charge the StethoSym, use the included power supply and micro-USB cable. Refer to the table
below for status light information.
Light Color
Power Status
Orange
Unit is charging. Orange light turns off when the unit is fully
charged.
Green
Unit is on and fully charged.
Flashing Red
Battery level is low.
Blue
Unit is on and receiving signal from manikin.
