©2020 CAE 905K472552 v1.1
1
Cautions and Warnings
C
AUTIONS
AND
W
ARNINGS
AC Adapter Safety
Failure to take the following precautions can result in serious injury or death from electric shock or
fire or in damage to the device. To select an appropriate power source for your HoloLens 2:
• Use only the power supply unit and AC power cord that was provided with your HoloLens
2.
• Do not use non-standard power sources, such as generators or inverters, even if the
voltage and frequency appear acceptable. Only use AC power provided by a standard wall
outlet.
• Do not overload your wall outlet, extension cord, power strip, or other electrical
receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by
the HoloLens 2 (indicated on the power supply unit) and any other devices that are on the
same circuit.
On devices where the AC prongs may be folded for storage, before plugging the AC adapter into a
power outlet, make sure its prongs are fully extended. On devices where the AC prongs are
removable and where the power supply uses a universal adapter, before plugging the AC adapter
into a power outlet, make sure the prong assembly is of the proper configuration for the power
outlet and fully seated into the adapter.
Battery Safety
The HoloLens 2 contains a 9V at 2A built-in battery. The battery in the HoloLens 2 is not user
replaceable. Improper use or disposal of the battery may result in explosion.
Do not heat, open, puncture, mutilate, or dispose of the product in fire.
Do not leave the HoloLens 2 in direct sunlight for an extended period of time. Extreme sunlight
exposure can cause battery damage.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often, but not always, posted and can include
fueling areas such as:
• Below decks on boats
• Fuel or chemical transfer or storage facilities
• Areas where the air contains chemicals or particles such as grain dust or metal powders
In fueling areas, sparks can occur and cause an explosion or fire. When you are in a fueling area, turn
off your HoloLens 2 and do not remove or install battery chargers, AC adapters, or any other
accessory.
Summary of Contents for LucinaAR
