Instructions for using HoloLens with VimedixAR™
19
©2017 CAE
905K800022 v4
The
Left
Cross
Section
button displays a cross-sectional view of the hologram anatomy based
on the position of the ultrasound beam cut plane.
The
Right
Cross
Section
button displays a cross-sectional view of the hologram anatomy based
on the position of the ultrasound beam cut plane.
Note:
The cross-sectional view that is displayed with the Left Cross Section button and the cross-
sectional view displayed with the Right Cross Section button are on opposite sides of the probe.
The
No
Cross
Section
button removes the cross-sectional view of the hologram anatomy.
The
Show
Layers
button* expands the different anatomical systems into layers above the
Physical Manikin.
The
Raise
Anatomy
button* raises the anatomy that is selected in the Structures Visibility menu
on the Vimedix system above the Physical Manikin such that the anatomy is 10 cm below eye
level. The
Raise
Anatomy
button also unlocks the zoom and rotation voice commands and
gestures.
The
Normal
button* displays the anatomy that is selected in the Structures Visibility menu on
the Vimedix system at the current Calibration position of the Hologram Manikin relative to the
Physical Manikin.
The
Normal
button is selected by default when your Shared Experience Mode is Student.
The
Probe
Visible
button* displays/hides the virtual probe.
The
Pause
Probe
button* freezes the AR and Ultrasound displays on the last scanned cycle and
loops the cycle on the displays. The
Pause
Probe
button is useful for analyzing cut planes.
* Button is disabled if your Shared Experience Mode is Student
