Instructions for using HoloLens with VimedixAR™
38
©2017 CAE
905K800022 v4
Zoom and Rotation Gestures
For all zoom and rotation gestures below, ensure that your index and thumb are visible by the HoloLens camera.
Note:
The tap and hold gesture is described at the following link
: https://support.microsoft.com/en-
ca/help/12644/hololens-use-gestures
Zoom Gestures:
•
Zoom IN:
Tap and hold, then slowly move your hand towards you
•
Zoom OUT:
Tap and hold, then slowly move your hand away from you
Rotation Gestures:
•
Rotate CLOCKWISE:
Tap and hold, then slowly move your hand towards the left
•
Rotate COUNTERCLOCKWISE:
Tap and hold, then slowly move your hand towards the right
Please refer to the Hologram Controls, Shared Demo and Local Demo subsections of the user guide to learn when
these zoom and rotation gestures are unlocked during a VimedixAR simulation.
Voice Commands
Each voice command begins by summoning
Vimedix
, then listening for a beep. For example, the command
“Start
Simulation”
would be issued by summoning
“Vimedix”
listening for the beep then requesting
“Start Simulation”
.
If a command is not issued within five (5) seconds a second beep is heard indicating that the HoloLens has exited
Voice Command Mode. To issue a voice command the user must re-summon Vimedix.
The following is a comprehensive list of when each voice command can be executed and by whom.
Note:
Each voice command can be executed by all users regardless of their Shared Experience Mode unless stated
otherwise.
