Instructions for using HoloLens with VimedixAR™
41
©2017 CAE
905K800022 v4
Command
Description
Options
Command Type
Move Caudal
Moves the Hologram Manikin
1cm in the direction of the
feet relative to the Physical
Manikin.
Calibration
Apply Stand
Inclines the Hologram
Manikin at a 45° angle on its
left side to match the
inclination of the Physical
Manikin when it is configured
with both stands.
Calibration
Remove Stand
Removes the 45° inclination
of the Hologram Manikin.
Calibration
Activate Cross
Section
Displays a cross-sectional
view of the hologram
anatomy based on the
position of the ultrasound
beam cut plane.
Probe / Beam
Configuration
Invert Cross
Section
Inverts the cross-sectional
view of the hologram
anatomy based on the
position of the ultrasound
beam cut plane.
Probe / Beam
Configuration
Remove Cross
Section
Removes the cross-sectional
view of the hologram
anatomy.
Probe / Beam
Configuration
Probe Pause
Freezes the AR and
Ultrasound displays on the
last scanned cycle and loops
the cycle on the displays. This
is useful for analyzing cut
planes.
Probe / Beam
Configuration
Probe Play
Unfreezes the AR and
Ultrasound displays.
Probe / Beam
Configuration
Show Probe
Displays the virtual probe.
Probe Configuration
Hide Probe
Hides the virtual probe.
Probe Configuration
Raise Anatomy
Raises the currently visible
anatomy above the Physical
Manikin and enables view
adjustments. Visible anatomy
can be specified using the
structures visibility menu on
the Vimedix system.
Rotate Clockwise
Rotate Counterclockwise
Increase Zoom
Decrease Zoom
Anatomy
Configuration
