FAST-PS-M – User’s Manual
15
2.
Power Supply Main Features
The features listed in this chapter are common to the FAST-PS-M family and can be
regarded as the basic features of this power supplies family.
2.1
Connectors
Three different types of connection are present in FAST-PS-M power supplies:
power cables connector (bus-bars), I/O connectors and remote sensing connectors.
Analog control input and trigger input are on BNC connectors which are optional and
needs to be added at the time of the ordering.
Power Cables Connectors
The load needs to be connected to the output connector placed on the rear panel
of the unit as shown in
Figure 3
.
Figure 3:
Output Connector
The symbols “+” and “-” on the rear panel indicate the positive and negative
polarity of the terminal respectively.
