FAST-PS-M – User’s Manual
22
2.3
Front Panel Indicators
The FAST-PS-M has four (4) front panel LED indicators as shown in the
following
Figure 12
.
Figure 12:
front panel indicators
The front panel indicators and their behaviour are hereafter listed (clockwise
starting from top-left):
•
C.C.
: Constant Current mode (
blue
). If turned on, the FAST-PS is working in
constant-current mode. When off, it is regulating the ouput voltage;
•
STAT
(
green
): signals the correct operation of the module diagnostics. The
blinking signaling the correct operation has a 1-second period;
•
OUT ON
(
blue
): it signals if the output is enabled or not. The blue LED is on
if the output is enabled and it is regualting output current or voltage;
•
ALARM
(
red
): if turned on signals that the power unit has experienced a fault
condition. It is necessary to perform a “reset fault” command in order to turn off
this LED and to turn to module output again (only if the fault condition/cause
has been removed).