FAST-PS-M – User’s Manual
28
This power supply is fan cooled, the air intake is at the front
panel and the exhaust is at the rear panel. Upon installation
allow cooling air to reach the front panel ventilation inlets.
Allow minimum 10 cm of unrestricted air space at the front
and the read of the unit.
Rack Mounting
The FAST-PS-M power supply series is designed to fit in a standard 19”
equipment rack.
Use a support bar to provide adequate support for the power
supply.
Desktop use
The FAST-PS-M power supply series can be used as desktop unit.
3.4
AC Input Power Connection
The AC line input connector on the rear panel is a standard IEC C14 male inlet
socket, with include fuse holder (
Figure 14
)
.
The required fuses characteristics for all the models are (
T10AL250V
):
•
Size:
20 x 5 mm
•
Current rating:
10 A
•
Blow characteristic:
Time delay
•
Breaking Capacity:
35 A
•
AC Voltage rating:
250V
CAUTION
NO