easy2log© RT0005 Technical Information Manual
10
Main Features
EPC C1G2 (ISO18000-6C) Compatible
Frequency range: 860 MHz ÷ 928 MHz
Read range: approx. 10m in air @ 2W ERP
Unique TID plus long EPC code (512 bit)
Memory capacity: 4k samples (8 Kbyte)
Multiple programmable sampling interval
Multiple programmable temperature thresholds
Multiple programmable alarms
Temperature Histogram function
Mean Kinetic Temperature function
Remaining Shelf Life function
Easy to use manual interface
Typical usage time: 1 year
Typical storage time: 6 months
Temperature range: -20°C to +70°C
Accuracy : ±0.5°C
Dimensions: 107 x 107 x 6.6 mm
3
Enclosure degree of Protection IP67
Battery charge status monitoring through RF or manual interface
Operating states
easy2log
©
RT0005 tag behaves according to the following operating states:
Stand-by.
Stand-by is the starting state of the tag. In this state the tag respond to reader interrogations, the log
memory is empty and the internal clock is not started. This is the lower power consumption state.
Idle.
The tag is in Idle state when the internal clock is running, the memory is empty and the tag is waiting for a start
logging command. The start command can be issued either by an RFID command or by the button.
Active.
The tag enters in Active state after having received the start logging command, in this state the tag wakes up at
defined intervals in order to acquire temperature samples and, eventually, it stores those samples inside the log
memory.
Sleep.
The tag enters in the Sleep state at the end of a logging activity. Differently from the Idle state, in Sleep state the
tag's log memory is not empty and it is retained until a reset command is issued.
