- Tile R1250I - Technical Information Manual
19
4
EASY2READ PROFILE
Introduction
By default, the reader is in the easy2read profile.
With the EASY2READ profile active you will use the CAEN RFID easy2read communication protocol and the
reader can be controlled using the
CAEN RFID Easy Controller Application
library.
If your reader is in the
HID
profile active, to set the EASY2READ profile, please refer to §
Connecting the Tile R1250I Reader using the
EasyController
Using the EASY2READ profile, you can connect to the Tile R1250I Reader using the
EasyController
software
via USB connection.
1.
Download the latest version of the
EasyController software
for Windows from the
page,
Downloads
section and install it.
2.
Verify that the Y USB cable provided with the reader is correctly plugged into the PC
3.
Install the required CAEN RFID USB driver as explained in §
page 11.
4.
Once the serial port connection is established, CAEN RFID
EasyController
software can be used to
interface the reader. Launch the
EasyController
by double clicking on the icon on your desktop:
5.
Click on
File
→
Connect
, select the RS232 Connection Type and select from the pull-down menu the
COM port number where the driver has mapped the
virtual
port for the Tile (in the example COM4)
and then click on
connect
.
Summary of Contents for Tile R1250I
Page 36: ...Tile R1250I FCC GRANT...
