Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. A1732-A1832 High Voltage Boards
02/05/2005
5
NPO:
Filename:
Number of pages:
Page:
00101/00:17XXx.MUTx/05 A1732B-A1832B_REV5.DOC
20
10
2.4.1 Packaging
The Mod. A 1732 – A 1832 modules are housed in a 5 TE-wide, 6U-high mechanics. The
Mod. A 1732B – A 1832B modules are housed in a 10 TE-wide, 6U-high mechanics.
2.4.2 External
connections
The location of all components of the front panel is shown in Fig. 2.1, p. 8. The function
and electro-mechanical specifications of the external connectors are listed in the
following subsections.
CH 0..11 (A 1732 – A1832):
Mechanical specifications:
HV coaxial connectors
Radiall SHVR317580-type
Electrical specifications
: high voltage output
according to specifications given in Table
2.1, p.7.
CH 0..27 (A 1732B – A 1832B):
Mechanical specifications:
Multipin connector Radiall 691803004-type,
52 pin male (to be mated with Radiall
691802002-type
4
[
SCEM 09.41.34.700.2
])
see
Fig. 2.1 for pin assignment.
Electrical specifications
: high voltage output
according to specifications given in Table
2.1, p.7.
HV EN CONNECTOR
Mechanical specifications
:
00-type LEMO connector.
Electrical specifications:
board ENABLE
input, if connected to ground, the channels
are enabled. Refer to § 4.2, p.15 for further
details.
2.4.3 Displays
CH ON 0..11 LEDs (A 1732 - A1832):
Function:
they light up as the relevant
channel is on.
Type:
red LEDs for positive polarity version
;
yellow LEDs for negative polarity version
HV ON LED (A 1732B - A1832B):
Function:
it lights up if at least one output
channel is on.
4
Requires 52 pins Radiall 691804300 [
SCEM 09.41.33.830.7
]
type, to be installed using the insertion/extraction
tool Radiall 282549024 [
SCEM 34.95.17.125.3
] type.
