NGPS – User’s Manual
14
1.2
NGPS at a Glance
The standard NGPS system is composed by a single 19-inch 3U crate. The NGPS
unit and its I/O connections can be easily seen in
(rear
view for air cooled models) and .
Figure 1:
NGPS front view
On the front side (
, no differences between air- and water-cooled units)
of the NGPS power supply are placed: a circuit breaker, a colour graphic display with
navigation switch for the local control and monitor of the module, three communication
sockets (2 SFPs and one Ethernet ports), four status LEDs and one USB device
connector.
Figure 2:
Air-cooled NGPS rear view
On the rear side of the unit (
) are placed: three-phase input connector,
earth connection terminal, output terminals, the D-Sub 15 Female Pin I/O connector
