NGPS – User’s Manual
19
1.4
Interlock and Status Signals
The NGPS module has four configurable dry-contact input interlocks and two
output status signals that are directly available on the D-Sub 15 Pin Female connector
on the rear panel (
A mating connector, a standard D-Sub 15 Pin Male type, can be installed in
order to use/access these available signals.
Figure 4:
I/O Connector
The pin index of the D-Sub 15 rear connector is summarized in the following
table:
Pin Number
Signal name
#1
Interlock #1 return
#2
Interlock #2 return
#3
Interlock #3 return
#4
Interlock #4 return
#5
DO NOT CONNECT
#6
DO NOT CONNECT
#7
Solid State Relay- Terminal #2
#8
Solid State Relay- Terminal #1
#9
Interlock #1 input
#10
Interlock #2 input
#11
Interlock #3 input
#12
Interlock #4 input
#13
Magnetic Relay Common Contact (C-TAP)
#14
Magnetic Relay Normally Closed Contact (NC-TAP)
#15
Magnetic Relay Normally Open Contact (NO-TAP)
Table 3:
D-sub 15 Pin pin-out
Pin #1
Pin #8
Pin #9
Pin #15
