qID R1240I Technical Information Manual
Technical Specifications Table
Frequency Band
865.600÷867.600 MHz (ETSI EN 302 208 v. 1.4.1.)
902÷928 MHz (FCC part 15.247)
Number of Channels
4 channels (compliant to ETSI EN 302 208 v. 1.4.1.)
50 hopping channels (compliant to FCC part 15.247)
RF Power
Programmable in 8 levels from 10dBm (10mW) e.r.p. to 27dBm (500mW)
e.r.p.
Antenna Gain
2dBi (typical)
Antenna Polarization
Dual linear (horizontal and vertical)
Standard Compliance
ISO 180006-C/EPC C1G2
Read Range
up to 1.5m. (typical)
USB Interface
USB 2.0 Full Speed (12 Mbit/s) device port
Bluetooth Interface
Class 1 with output power 5dBm e.i.r.p.
Virtual COM port parameters:
Baudrate: up to 921’600kbps
Databits: 8
Stopbits: 1
Parity: none
Flow control: none
User Interface
Button #1:ON/OFF
Button #2: Trigger
Led #1: power indication and battery status (green: high; red: low)
Led #2: communication activity (blue: Bluetooth; orange: USB)
Led #3: operation result (green: OK; red: not OK)
Buzzer: bitonal for events signalling
Internal Buffer Size
5MByte (equivalent to 400000 EPC codes@96bit) (TBC)
Barcode Reader
1D and 2D imager (only in Mod. WR1240IXBAAA). For more details, see §
Readable Barcodes
pag.
21
.
Battery Type
Li-Ion 3.7V, 2100mAh
Battery Life
Operating: > 8h
Standby: > 7 days
Battery Charging Time
7h from USB port
3h with AC/DC adapter
Operating Temperature
-10 °C to +55 °C
IP Rating
IP54
Dimensions
140 x 90 x 35 mm
3
max. (5.5 x 3.6 x 1.4 in
3
)
Weight
180g max. (without barcode module installed)
191g max. (with barcode module installed)
Length of USB cable
1,5 m
Tab. 4.1: qID R1240I Technical Specifications Table
