- qIDmini Technical Information Manual
59
down the
trigger
button to save the
month
and pass to the
year
value. Press quickly the
trigger
button to change the
year
value. Then hold down the
trigger
button to save the
year
and hold
down again to save the complete date. The date begins to flash and the reader returns to the main
menu.
Time:
is displayed in the 24-hour format
hh:mm
(e.g. 12:51) the time is the second option of the clock
submenu. Scroll through the CLOCK options menu by pressing quickly the
trigger
button until the
Time
option is displayed and then hold down the
trigger
button for a few seconds to set the time.
The time is shown in the 24-hour format
hh:mm
(e.g. 12:51). Press quickly the
trigger
button to
change the
hh
value. Then hold down the
trigger
button to save the
hour value
and pass to the
minutes
value. Press quickly the
trigger
button to change the “
mm”
value. Then hold down the
trigger
button to save the
minutes value
and hold down again to save the complete time. The time
begins to flash and the reader returns to the main menu.
To return to the main menu, quickly press the
power
button.
In the OFFLINE profile, if you are interested in showing the date and time information of the read tags, you
need to set the
clock
and enable the
Time Stamp
(see §
). The timestamp is not shown on
the reader display but only associated with the EPCs in memory and displayed on the PC when the data is
downloaded.
OPTIONS
Through this option, you can enable/disabled the correspondent profile options.
By default this value is enabled and the user can access the profile options (for more info on the available
profile options, please refer to §
page 18,
page 34,
Set the value to disabled in order to denied the access to the profile options.
PINCODE
The PINCODE is a personal identification number (PIN) of 4 digits length used to authenticate the user who
accesses the main configuration menu
The following list shows the accepted characters for the PINCODE:
'0','1', '2', '3', '4', '5', '6', '7', '8', '9'
By default the PINCODE string is empty, so anyone can access the configuration menu. To set the
PINCODE, hold down the
trigger
button for a few seconds. The PINCODE string empty is shown. Press
quickly the
trigger
button to change the
first
value. Then hold down the
trigger
button to save the first
value. Press quickly the
trigger
button to change the
second
value. Then hold down the
trigger
button to
save the second value and so on until the fourth digit. Then press quickly the power button to fix the
PINCODE string and then hold down the trigger button to save it. The PINCODE begins to flash and the
reader returns to the main menu. It is possible to insert a shorter PINCODE string.
To return to the main menu, quickly press the
power
button.
To restore the empty string, go to PINCODE option and hold down the trigger button. The current active
PINCODE is shown. Press quickly the trigger button to restore the empty string. Then press quickly the
power button to fix the PINCODE string and then hold down the trigger button to save it.
Warning
: Note that it is not possible to retrieve a forgotten PIN. In this case the user have to
send the reader to CAEN RFID Return&Repair service.
Summary of Contents for qIDmini R1170I
