- qIDmini Technical Information Manual
9
Front panel
The qIDmini R1170I front panel houses the following LEDs and buttons (see figure below):
Fig. 1.3: Front Panel
No.
Name
Description
1
Display
LCD Alphanumeric (8 chars x 2 lines)
2
Link LED
Indicates the Bluetooth and USB/charger connection (see §
3
Power LED
Indicates the reader status and battery level (see §
4
Trigger button
Inventory mode: press to perform an inventory cycle (hold down the button to
repeat inventory cycles)
Menu mode: quick press to scroll, hold down for a few seconds to activate an
option
5
Power button
Press the button to switch on the reader, press for at least 2 seconds to switch
it off
Menu mode: press to return to the main menu
Tab. 1.1: Front Panel LEDs and Buttons
Status
Description
Green
Reader is active and the battery charge is in the range 35÷100%
Orange
Reader is active and the battery charge is in the range 15÷35%
Red
1
Reader is active and the battery charge is in the range 0÷15%
Tab. 1.2: qIDmini R1170I Power LED Status Table
Status
Description
OFF
No connection established
Orange
USB cable connected (both to a PC or to the AC power adapter)
Blue
Bluetooth connected
Tab. 1.3: Bluetooth LED status table
1
Blinking red LED at power on indicates that the battery is empty and a recharge shall be performed
Summary of Contents for qIDmini R1170I
