- trID R1210I - Technical Information Manual
8
Status
Description
OFF
No connection established
Orange
USB cable connected (both to a PC or to the AC power adapter)
Blue
Bluetooth connected
Green
Configuration mode
Tab. 1.3: Bluetooth LED status table
Charging
The trID R1210I is supplied with an USB cable while the power supply for charging is an optional accessory
(see
§ Accessories
page 11).
When you charge the reader, the charge LED (see §
Tab. 1.1: Bottom Panel LEDs and
page 7) lights up
orange.
When the reader is on, the charge LED (see §
Tab. 1.1: Bottom Panel LEDs and
page 7) indicates the battery
level according to table
Tab. 1.2: Charge LED Status Table
page 7.
Y
Warning:
EMPTY BATTERY CONDITION: When the reader is completely discharged, it is
recommended to fully charge it.
USB connector
A USB Type C socket connector is located in the bottom side of the trID R1210I (see §
page 7) and can be used to connect the reader to an USB host port or to an AC/DC battery charger.
Ordering Options
The reader is available in
ETSI or
FCC
version:
Code
Description
Reader
WR1210IXEUAA
trID - RAIN RFID smart tray reader - ETSI
WR1210IXUSAA
trID - RAIN RFID smart tray reader - FCC
