– trID R1210I - Technical Information Manual
9
2
TECHNICAL SPECIFICATIONS
Technical Specifications Table
Frequency Range
865.600÷867.600 MHz (ETSI EN 302 208 V3.1.1) (Mod. R1210IE)
902÷928 MHz (FCC part 15.247) (Mod. R1210IU)
RF Power
Configurable from 4 dBm ERP to 21 dBm ERP (Mod. R1210IE)
Configurable from 6 dBm EIRP to 23 dBm EIRP (Mod. R1210IU)
Number of Channels
4 channels (compliant to ETSI EN 302 208 V3.1.1) (Mod. R1210IE)
50 hopping channels (compliant to FCC part 15.247) (Mod. R1210IU)
Standard Compliance
EPC C1G2 - ISO 18000-63
Antenna Gain
-4dBi
Antenna Type
Near Field UHF Antenna
Read Range
up to 15 cm (typical; depending on tag)
USB Interface
USB 2.0 Full Speed (12 Mbit/s) via USB Type-C connector
Bluetooth Interface
– Bluetooth 4.1 Smart Ready compliant
– 12dBm EIRP output power BR/EDR
– 8dBm EIRP output power BLE
– HID and Serial over GATT (BLE)
– HID and SPP profiles (Bluetooth classic)
User Interface
– Power button
– Power and battery status LED
– Communication and operation result LED
– Bi-tonal buzzer element for event signalling
Battery Type
Li-ion 3.7V, 2150mAh
Battery Life
Operating: > 18 h (with 60,000 tag readings)
Standby: > 15 days (powered off, no LED blinking)
Battery Charging Time
– 6h connected to a PC USB port
– 2h 40min with 1A AC/DC power supply
IP Rating
IP30
Dimensions
– trID: 217 x 146 x 14 mm
3
(8.54 x 5.75 x 0.55 inches
3
)
Length of USB cable
1.5 m
Operating
Temperature
-10 °C to +55 °C
Weight
– trID: 375 g
Tab. 2.1: trID R1210I Technical Specifications Table
Y
Warning
: The RF settings must match the operating country/region to comply with local laws and
regulations.
The usage of the reader in different countries/regions from the one in which the device has been
sold is not allowed.
