49-2000203 Rev. 0
13
Settings
WiFi Connect and Remote Enable (cont.)
4. If the connection light does not turn on or is blinking,
follow the instructions on the app to reconnect. If issues
continue, please visit
cafeappliances.com/connect
and
ask for assistance regarding oven wireless connectivity.
To connect additional smart devices, repeat steps 1 and 2.
Note that any changes or modifications to the remote
enable device installed on this oven that are not
expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely once connected to
WiFi, select
Turn Remote On/Off
and the icon will turn
on in the display. The oven can now be remotely started
with a connected device. The icon must be lit to start the
oven remotely. The icon is not required to change the
oven temperature while it is running, set a timer or to turn
the oven off from the phone app while the
icon shows it
is Wifi Connected.
After using the oven, remember to verify that the icon
is lit if you wish to start the oven remotely in the future.
NOTE:
)RRGVWKDWVSRLOHDVLO\²VXFKDVPLONHJJVILVK
VWXIILQJVSRXOWU\DQGSRUN²VKRXOGQRWEHDOORZHGWR
sit for more than 1 hour before or after cooking. Room
temperature promotes the growth of harmful bacteria. Be
sure that the oven light is off because heat from the bulb
will speed harmful bacteria growth.
Clock
This setting sets the oven clock time. Press the
Settings
pad and select
Clock
. Select
Set Clock
and follow the
instructions to set the clock. This feature also specifies
how the time of day will be displayed. You can select a
VWDQGDUGKRKRXUPLOLWDU\WLPHGLVSOD\
+RUQRFORFNGLVSOD\HG2II3UHVVWKH
Settings
pad,
select
Set Clock
and select either
12/24 hr
or
On/Off
.
Bluetooth
®
- Chef Connect
This is a pairing feature for use with other compatible
Chef Connect
enabled products like an over-the-
range microwave oven or range hood. To pair those
products to the range Press the
Settings
pad and select
Bluetooth
®
. Select
Pair
and follow the corresponding
instructions included with the mating Chef Connect
enabled product. The range will cancel pairing mode
after two minutes if no mating device is detected. Select
Remove
to confirm product is paired or to un-pair from
range. The Precision Cooking Probe can also be paired
using the Bluetooth
®
feature.
Auto Conv (Auto Conversion)
When using Convection Bake and Convection Roast
cooking, Auto Recipe Conversion will automatically
convert the regular baking temperatures entered to
convection bake cooking temperatures when turned
on. Note that this option does not convert convection
bake cooking times, it only converts temperatures. This
feature may be turned On or Off. Select
Settings
, Auto
Conversion is 5th option and shows up on first display of
settings, and
Auto Conversion
then follow the prompts
to turn this feature on or off.
Auto Off
This feature shuts the oven down after 12 hours of
continuous operation. It may be enabled or disabled.
Select
Settings
,
More
, and
Auto Off
to turn this feature
on or off.
Sound
You can adjust the volume and type of alert your appliance
uses. Select
Settings
,
More
, and
Sound
. Follow prompts
for making volume adjustments or for changing between
continuous and single alert tones. A continuous setting
will continue to sound a tone until a button on the control
is pressed. The oven tone volume can be adjusted. The
control will sound the oven tone at the new volume level
each time the sound level is changed.
F/C (Fahrenheit or Celsius)
The oven control is set to use Fahrenheit temperatures
)EXW\RXFDQFKDQJHLWWRXVH&HOVLXVWHPSHUDWXUHV
&6HOHFW
Settings
,
More
, and
F/C
to alter between
temperature scales displayed.
Adjust the Oven temperature
This feature allows the oven baking and convection
baking temperature to be adjusted up to 35ºF hotter
RUGRZQWR)FRROHU8VHWKLVIHDWXUHLI\RXEHOLHYH
your oven temperature is too hot or too cold and wish to
change it. This adjustment affects Bake and Convection
Bake modes. Does not change Proof or Cleaning modes.
Select
Settings
and
Oven Adjust
to add
More Heat
or
Less Heat
and then press
Save
.
Oven Info
Select
Settings
,
More
, and
Oven Info
to turn this
feature on or off. This setting displays Model Number and
Software Version.
USING THE RANGE:
Settings
