31-2000815 Rev. 0
9
Installation
2
MOVE THE RANGE INDOORS
1 . Tilt the range forward on the skid .
2 . Lift the toekick out of the foam base .
3 . Drive the blade of the hand-truck beneath the foam
block .
IMPORTANT:
Do not remove the base foam block while
the hand-truck is in use . Place the hand-truck blade
underneath the base foam block and transport the range
to the final location .
4 . Attach the hand-truck straps around the unit .
IMPORTANT:
Place the hand-truck straps below the
oven door handles. To avoid damaging the side panels,
place a pad between the hand-truck and the range .
5 . Tilt the range to lower the hand-truck wheels off the
skid .
6 . Place the appliance runners on the floor at the left
and right sides in front of the opening .
IMPORTANT:
The runners provide a surface for
rolling the range into the final position and will protect
the floor finish . The runners must be removed before
leveling the range .
7 . Move the range indoors . Position the range in front of
the installation location, onto the runners.
Toekick
Toekick
Insert Blade Under
the Foam Block
You may need to remove
the front of the foam block
to fit through the doorway .
Hand-Truck
Straps Below
Oven Door
Handles
Range
Opening
Runners
for Rolling
the Range
into
Position
