Cafe CDD420P2TS1, Installation Instructions Manual

10

Water Connection

Recommended 

HOT

(Maximum 140°F/60°C).
Supplied hose to

VXLW»´PPPDOH

compression fitting.

Kosher requirements

Drains will need to be 

separated to satisfy 

kosher requirements. 

We suggest you confirm 

acceptability with your 

local rabbi in respect to 

kosher installations.

Water Pressure

Max. 1 MPa (145 psi)

Min. 0.03 MPa (4.3 psi)

IMPORTANT

The power outlet must be 

located in a cabinet adjacent 

to the dishwasher cavity. 

110-120 VAC max. 15 A

Service Holes

Can be located either side of dishwasher, close to the rear face and the 

floor, as illustrated, for access to the water supply, drain and power outlet. 

The small hole is for the power cord only.

Ŷ

If the hole is through wood, make sure its edges are smooth and rounded.

Ŷ

If the hole is through metal, ensure you fit the supplied Edge Protector to 

prevent damage to the power cord.

These marks indicate formed 

bracket screw locations, if 

securing by drawer removal.

If there is no side partition, you 

can construct timber bracing as 

something to secure into.

Moisture 

protection 

tape must be 

applied.

3/8”

(10 mm)

COUNTERTOP

IMPORTANT

Incorrect placement of the 

hole will result in damage to 

hoses.

Ø 2 1/4” 

(57 mm)

Max 1/2” (10mm)

Max distance between 
hole edge and floor

Max 1/4” (5mm)

Max distance between 
hole edge and rear 
inner face

max. 17 11/16”
(450 mm)

min. 7 7/8” (200mm)

Hoses

Power 

cord

Ø max. 1 1/2” 

(38 mm)

Installation Preparation

CAVITY PREPARATION