Cafe CDD420P2TS1, Installation Instructions Manual

3

Installation Preparation

PARTS SUPPLIED IN 
INSTALLATION PACKAGE

If the drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit 

WD24X30798

 which will extend the drain hoses by 11’ 10” (3.6m).

The kit is available from 

GEApplianceparts.com

 or by phone at 877.959.8688 during normal business hours.

Clamp (1)

(for securing 

Drain hose joiner)

Wire clip (2) 

(for securing 

Drain hose joiner)

Phillips 

»´PP

screws (9)

Drain hose 

support (1)

Moisture protection 

tape (1)

(to prevent moisture 

damage to cabinetry) 

Drain hose 

joiner (1)

Top 

mounting

brackets (2)

OPTIONAL

Prefinished 

toekick (1)

Edge Protector (1)

(If the services hole is through a 

metal partition, the hole must be 

protected with the Edge Protector 

supplied to prevent damage to the 

power cord or hoses.)

Rubber washer 

for inlet hose (1)

(comes already 

fitted)

Hexagonal

socket for feet 

adjustment (2)

(long & short)

Side mounting

bracket kit

(A and B) (2)

OPTIONAL

NOTE:

 Consider recycling options for your appliance packaging material.

DISHWASHER DRAWER 
INSTALLATION OVERVIEW

This video provides an overview of what is needed to install a Dishwasher Drawer. 

It is intended as an overview only of the installation process and is not intended to be used as a guide on how to install the Dishwasher Drawer yourself.

TOOLS YOU WILL NEED

Measuring Tape

Drill and Bits

Phillips-Head 

Screwdriver

Flashlight

Gloves

Carpenter’s 

Square

Safety Glasses

Level

Flat Head 

Screwdriver