49-2000386 Rev. 1
7
USING THE RANGE:
Surface Units
Surface Units
Operating the Cooktop Elements
WARNING
FIRE HAZARD: Never leave the
range unattended with the cooktop on medium or
high settings. Keep flammable items away from the
cooktop. Turn off all controls when done cooking.
Failure to follow these instructions can result in fire,
serious injury or death.
Before using the cooktop for the first time, clean it with
CERAMA BRYTE
®
Ceramic Cooktop Cleaner. This helps
protect the top and makes cleanup easier.
Turn element(s) On: Touch and hold
On/Off
pad about
half a second. A chime can be heard with each touch to
any pad.
Power level can be selected in any of the following ways:
1.
Swipe the gray arc
(on the graphics) to the desired
power level.
There is no sensor on the LEDs
, or;
2. Touch
Anywhere
along the gray arc, or;
3. Touch
+
or
-
pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the
+
pad, or;
5. Shortcut to Low: Immediately after turning unit on,
touch the
-
pad.
NOTE:
When changing from a high heat setting to a
lower heat setting, the surface unit may stop glowing.
This is normal. The unit is still on and hot.
NOTE:
This cooktop has a rapid heat-up feature. If the
cooktop is cool when turned on, it will glow red for a short
period of time until the desired power setting is reached.
Graphics are representative;
your control may have alternate graphic details.
Gray Arc
Swipe Area
LED
Lights
Gray Arc Swipe Area
Summary of Contents for CES700M2NS5
