6
49-2001107 Rev. 1
In Case of a Power Failure
Surface Burners
USING THE COOKT
OP:
In
Case
of
a
Power
Failure
/
Surface
Burners
In the event of a power failure, the surface burners may
be lit with a match. Using extreme caution, hold a lit
match near the ports beneath the surface burner cap,
then slowly turn the knob to the LITE position. Once lit,
surface burners will continue to operate normally.
Lighting a Surface Burner
WARNING
Burners should be operated only
when covered by cookware. Burner flames not
covered by cookware present a risk of fire or
clothing ignition. Never let flames extend beyond the
sides of the cookware. Failure to comply may result
in serious injury.
Make sure all burners are in their correct locations and
fully assembled before attempting to operate any burner.
Select a burner and find its control knob. Push the knob
in and turn it to the LITE position.
You will hear a clicking noise—
the sound of the electric spark
igniting the burner. When one
burner is turned to LITE, all
burners will spark. Sparking will
continue as long as the knob
remains at LITE. Once gas is
ignited, turn the knob to adjust
the flame size.
Selecting a Flame Size
Watch the flame, not the knob, as you adjust heat. When
rapid heating is desired, the flame size should match the
size of the cookware you are using. Flames larger than
the bottom of the cookware will not heat faster and may
be hazardous.
Using the Surface Burners
NOTES:
■ Do not operate the burner for an extended period of
time without cookware on the grate. The finish on the
grate may discolor or chip without cookware to absorb
the heat.
■ Do not attempt to disassemble any burner while
another burner is on. Damage to the product
may occur.
■ Be sure the burners and grates are cool before you
place your hand, a pot holder or cleaning materials
on them.
Your cooktop has sealed gas burners that offer
convenience, cleanability and flexibility for a wide range
of cooking applications.
The smallest burner is the simmer burner. A simmer
burner turned down to LO provides precise cooking
performance for foods such as delicate sauces that
require low heat for a long cooking time.
The extra-large burner is designed to quickly bring
large amounts of liquid to a boil. Some models have a
POWER BOIL™ setting especially designed for use with
cookware with a diameter of 11 inches or larger.
Types of Surface Burners
Round Burner (
on some models)
Use this burner for general cooking purposes.
Size cookware appropriately to the flames.
Multi-Ring Burner (
on some models)
Use this burner for large cookware or for simmering applications.
These flames are too large for the pot
Push the control knob in and
turn it to the LITE position.
