49-2000387 Rev. 4
11
Precision Cooking (Cont.)
USING THE RANGE:
Precision Cooking
Hestan Cue
®
Cookware or Precision Probe (Cont.)
4. When prompted, touch the
On/Off
button of the
desired burner.
5. If you choose the rear burners or front right, the range
will search for your paired smart accessory.
6. On some models, if you choose the front left burner,
the LCD will prompt for you to choose which type
of cookware you wish to use. To use Hestan Cue
®
cookware or Precision Probe, choose
BLUETOOTH
COOKWARE/PROBE.
7. When your paired cookware or probe is detected, you
will be prompted to activate it. This turns it on so it is
ready for cooking.
8. If no paired accessories are found, Precision Cooking
will cancel. Refer to Settings – Bluetooth to pair
Hestan Cue
®
cookware or Precision probe.
9. Activate your Hestan Cue
®
cookware or Precision
Probe. Refer to the table for instructions for each
device.
If it is not activated within 2 minutes, the Precision
Cook mode will timeout.
10. When this screen shows, your Hestan Cue
®
cookware or Precision probe is ready to select the
cooking temperature. As you adjust the temperature
level at the burner control or in the SmartHQ app,
the desired temperature will appear on the display.
See section Surface Units – Operating the Cooktop
Elements.
When the burner is On, the LCD display shows an
orange outline.
When the display shows “PREHEATING” the
cookware temperature is increasing. When it reaches
the desired set temperature, the word “PREHEATING”
will disappear.
CANCEL
SELECT BURNER
Press On/O button on desired burner or press Sync
Burners button to join the two left burners.
10:35 AM
SELECT COOKWARE TYPE
The selected burner may be used with conventional
cookware or with Precision Cooking compatible
Bluetooth cookware.
BLUETOOTH COOKWARE/PROBE
CONVENTIONAL
10:35 AM
CANCEL
10:35 AM
NO COOKWARE PAIRED
This burner works only with compatible Bluetooth
cookware or probe.
10:35 AM
CANCEL
ACTIVATE COOKWARE
Activate Precision Cooking compatible cookware or
Precision Cooking probe. Cookware should be large
enough to span both burners.
Supported
Devices
How to Activate
Control with this App
Hestan
Cue
®
cookware
Firmly double tap the
black plastic endcap
Hestan Cue®
(by Hestan Smart Cooking)
Precision
Probe
Press side button once
Café Kitchen
(by Café)
10:35 AM
OK
NO COOKWARE ACTIVATED
Unable to detect active Bluetooth cookware or
Precision Cooking probe.
COOKTOP
10:35 AM
TO OVEN
Use burner controls or
mobile app to to set the
Precision Cooking
temperature.
OFF
OFF
OFF
OFF
Warming
Zone
READY
OFF
OFF
OFF
OFF
Warming
Zone
COOKTOP
10:35 AM
TO OVEN
Use burner controls to
update Precision Cooking
temperature
175
°F
PREHEATING