background image

10

49-2000061

Installation Preparation

ADVANCE PLANNING

Duct Install Planning

•   This hood may be vented vertically through upper 

cabinets, soffit or ceiling. A duct transition piece is 

supplied for vertical exhaust. Use locally supplied 

elbows to vent horizontally through the rear wall.

•   Use metal ductwork only.
•   Determine the exact location of the vent hood.
•   Plan the route for venting exhaust to the outdoors. 

To maximize the ventilation performance of the 

vent system:

  1.  Minimize the duct run length and number of 

transitions and elbows.

  2.  Maintain a constant duct size.

  3.  Seal all joints with duct tape to prevent any 

leaks.

  4.  Do not use any type of flexible ducting.
•   Use the shortest and straightest duct route 

possible.

•   Install a wall cap or roof cap with damper at the 

exterior opening. Order the wall or roof cap and 

any transition needed in advance.

•   When applicable, install any makeup (replacement) 

air system in accordance with local building code 

requirements. Visit 

cafeappliances.com

 for 

available makeup air solutions.

Wall Framing for Adequate Support

•  This vent hood is heavy. Adequate structural 

support must be provided. The hood must be 

secured to vertical studs in the wall. See page 15.

•   We strongly recommend that the vent hood with 

duct cover be on site before final framing and wall 

finishing. This will also help to accurately locate 

the ductwork and electrical service.

OPTIONAL ACCESSORIES

Duct Cover

A decorative duct cover is available to 

accommodate 8 to 10 ft. ceiling heights. The duct 

cover will expand from 12” minimum or 24” to 36” 

maximum height.
•  The duct cover conceals the ductwork running 

from the top of the hood to the ceiling.

•  The duct cover accessory fits both 30” and 36” 

wide models. Order the duct cover accessory at 

the same time as the vent hood. All accessories 

should be on site at the time of hood installation. 

Order 

JXCHSS

.

INSTALLATION PREPARATION

2 Wood 

Screws

2 Washers

2 Wall Fasteners

2-Piece Duct Cover 

with Ceiling Bracket

4 Phillips Head Screws

2 Phillips Head 

Decorative Screws

Ceiling Bracket

Summary of Contents for CVW9301

























Reviews: