Cafe CVW9301, Owner'S Manual & Installation Instructions

6

49-2000061

Be sure the circuit breaker is off and all surfaces are cool before cleaning or servicing any part of the vent hood.

Reusable Metal Grease Filters

The hood has 2 metal reusable grease filters.
The metal filters trap grease released by foods on the 

cooktop. They also help prevent flaming foods on the 

cooktop from damaging the inside of the hood.
For this reason, the filters must 

ALWAYS

 be in place 

when the hood is used. The grease filters should be 

cleaned once a month, or as needed.

To clean the grease filters

, soak them and then swish 

them around in hot water and detergent. Don’t use 

ammonia or ammonia products because they will darken 

the metal. Do not use abrasives or oven cleaners. Light 

brushing can be used to remove embedded dirt. Rinse, 

shake and let them dry before replacing.

To remove:

Grasp the filter handle and pull it up, forward and out.

To replace:

1.   Hold the filter at the 

bottom with the handle.

2.  Place the top end of the 

filter against the inside 

front of the hood.

3.  Slide it up until it stops 

and push the bottom 

end back until it snaps 

into place.

Filter

CARE AND CLEANING:

 Filter / Surfaces

Stainless Steel Surfaces (on some models)

Do not use a steel wool pad; it will scratch the 

surface.

To clean the stainless steel surface, use warm sudsy 

water or a stainless steel cleaner or polish. Always wipe 

the surface in the direction of the brush line. Follow 

the cleaner instructions for cleaning the stainless steel 

surface. Cleaners with oxalic acid such as 

Bar Keepers 

Friend Soft Cleanser™

 will 

remove surface rust, tarnish, and 

small blemishes. To receive a 

$2.00 coupon for a trial sample 

of 

Bar Keepers Friend Soft 

Cleanser™

 follow the link below 

or scan the QR Code.

www.barkeepersfriend.com/ge

Use only a liquid cleanser free of grit and rub in the 

direction of the brush lines with a damp soft sponge. 
To inquire about purchasing stainless steel appliance 

cleaner or polish, or to find the location of a dealer 

nearest you, visit 

cafeappliances.com/parts

.

Painted Surfaces (on some models)

Do not use a steel wool pads or other abrasive 

cleaners; they will scratch the surface.

Clean grease-laden surfaces of the hood frequently. To 

clean the hood surface, use a hot, damp cloth with a 

mild detergent suitable for painted surfaces. About one 

tablespoon of ammonia may be added to the water. Use 

a clean, hot, damp cloth to remove soap. Dry with a dry, 

clean cloth. 

NOTE:

 When cleaning, take care not to come in contact 

with filters and other surfaces.

CAUTION

When cleaning the hood surfaces, 

be certain that you do not touch the light with moist 

hands or cloth. A warm or hot light may break if 

touched with a moist surface. Always let the light 

cool completely before cleaning around it.

Surfaces