Cafe CVW9301, Owner'S Manual & Installation Instructions

49-2000061

7

Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.

NOTE:

 The glass cover should be removed only when 

cold. Wearing latex gloves may offer a better grip.

CAUTION

 Before replacing your light bulb, 

disconnect the electrical power to the hood at the main 

fuse or circuit breaker panel. 
Be sure to let the light cover and bulb cool completely.
For your safety, do not touch a hot bulb with bare hands 

or a damp cloth.

To remove:

1.   Turn the glass cover 

counterclockwise until 

the glass cover clears the 

socket.

2.  Using gloves or a dry cloth, 

remove the bulb by pulling it 

straight out.

To replace:

1.   Use a new 12-volt, 20-watt (maximum) 

Halogen bulb for a G-4 base.

2.  Using gloves or a dry cloth, remove the new bulb from 

its packaging. 

NOTE:

 Do not touch the new halogen 

bulb with bare fingers. Touching the bulb with bare 

fingers will significantly reduce the life of the bulb.

3.  Push the bulb straight into the receptacle all the way.
4.  Place the glass cover onto the socket and turn 

clockwise until secure. For improved lighting, clean 

the glass cover 

frequently using a 

damp cloth. This 

should be done 

when the hood is 

completely cool.

5.  Reconnect electrical 

power to the hood.

CARE AND CLEANING:

 Lights

Lights

Bulb

Socket

Glass cover

Receptacle

Use 

gloves 

or cloth

Receptacle