Caffini Libellula 1/3" aluminium on frame Use And Maintenance Instructions Download

Page: 2 / 16

INSTRUCTION FOR THE USE AND MAINTENANCE - LIBELLULA 1/3” SERIES - Vers. 1/16

INSTRUCTION FOR THE USE AND MAINTENANCE - LIBELLULA 1/3" SERIES –vers. 01/16

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

WARNING

DO NON OPERATE THE PUMP UNTIL YOU HAVE READ AND

UNDERSTOOD THIS MANUAL.

CAFFINI PUMPS DECLINES ALL AND EVERY LIABILITY FOR

DAMAGE DUE TO NEGLIGENCE AND FAILURE TO COMPLY WITH

THE INSTRUCTIONS IN THIS MANUAL.

CAFFINI PUMPS WILL NOT BE LIABLE FOR DAMAGE CAUSED BY

INCORRECT INTERPRETATION OF THE INSTRUCTIONS IN THIS

MANUAL

FOR

DAMAGE

CAUSED

INCORRECT

INSTALLATION AND/OR BY IMPROPER USE OF THE PUMP

ITSELF.

Summary of Contents for Libellula 1/3" aluminium on frame

















Search results

Summary of Contents for Libellula 1/3" aluminium on frame

Reviews:

Related manuals for Libellula 1/3" aluminium on frame

Brands by name

Popular brands

Caffini Libellula 1/3" aluminium on frame, Use And Maintenance Instructions

Search results

Summary of Contents for Libellula 1/3" aluminium on frame

Reviews:

Related manuals for Libellula 1/3" aluminium on frame

Brands by name

Popular brands