INSTRUCTION FOR THE USE AND MAINTENANCE - LIBELLULA 1/3” SERIES - Vers. 1/16
4
INSTRUCTION FOR THE USE AND MAINTENANCE - LIBELLULA 1/3" SERIES –vers. 01/16
4
1. PRESENTATION
This manual contains all information considered necessary for the knowledge, good use and routine
maintenance of the Libellula 1/3” pump (hereinafter, also called machine), manufactured by CAFFINI CIPRIANO
S.r.l., hereinafter also called Manufacturing company or Manufacturer. The non-‐compliance with this manual
causes the cancellation, by the Manufacturing company, of the warranty it supplies with the machine. For any
repairs or revisions entailing complex operations, directly contact the Manufacturing company for ready and
accurate after-‐sales technical assistance.
These are COPY of the original instructions.
2. WARRANTY
Upon receipt of the material, immediately check it for damages due to transport. Also check the exact
correspondence of the transport document. Any claims must, under penalty of expiration, be immediately
contested to the courier in the transport document and notified within seven days to the Manufacturer by
means of registered letter with acknowledgement receipt. When sending any communication, always indicate
the type and model of the machine printed on appropriate plate or punched near the oil introduction plug, and
the serial and/or series number. All our products have a 12 month warranty starting from the commissioning
date and, however, for not more than 18 months from the date of delivery. The repairs carried out under
warranty do not interrupt the warranty period. The warranty refers to material or processing defects that
jeopardise the functioning of the product or make it unsuitable for the use for which the product is intended, as
long as timely notified and, however, not later than 2 days after their finding. The damages deriving from the
physical/chemical features of the sucked liquid are excluded, as are the damages of the parts that are, for
nature or destination, subject to wear or deterioration (seal gaskets, diaphragms, vacuum and pressure valves,
rubber or plastic parts), or that depend from the non-‐compliance with our use or maintenance instructions, bad
or inadequate use or storage of the product or amendments or repairs made by staff not authorised by
ourselves.
3. MANUFACTURER
The Libellula 1/3” series pumps are manufactured by CAFFINI CIPRIANO S.r.l. with offices in Lemignano di
Collecchio (Parma) -‐ ITALY -‐ post code 43044 -‐ Via G. Di Vittorio n. 46 -‐ Tel. +39 0521 804325 Fax +39 0521
804145 – e-‐mail:
info@caffinipumps.it
Registered with the Chamber of Commerce of Parma with n. 175881 -‐ in
the Company Register -‐ nr. Mechanized PR017469 -‐ tax code and VAT n. IT02002550347.