15
Dispensing stops
when the selected
programmed amount
is reached. You can
also press the button
again to stop the
dispensing in advance,
e.g. if you like a Piccolo
or Macchiato.
When you have
finished making your
milk beverage, raise
the
Lever
to eject
the used capsule into
the
Used Capsule
Drawer
& close the
Lever.
Your machine will
start dispensing
depending on the
button selected.
You can choose to
top up with another
shot of espresso by
inserting another
capsule & pressing
the
Single Espresso
button.
11.
Always ensure the
Milk Jug
is placed
back into position
gently
but
firmly
onto
your machine. There
should be
NO GAP
between the
Milk
Jug Connector
and
the Machine.
Press and release
the
Cappuccino
, or
Café Latte
button
depending on the
desired beverage.
The selected button
will flash.
9.
10.
DISPENSING MILK BASED DRINKS - continued
PLEASE NOTE:
To maintain the freshness of the milk, the
Milk Jug
should be removed
and stored in the refrigerator between uses. Please ensure a
‘Milk Jug System Cycle’ on
Page 21
is completed before removing & storing in the refrigerator. We recommend only
storing the refrigerated milk in the Milk Jug for a maximum of 2 days.
1.
To add more hot water to your beverage, check there is no capsule in the
Capsule
Compartment
, press and release the
Tea button
until you have the amount you desire,
then press the
Tea button
again to stop the hot water dispensing.
2.
To ensure optimum product delivery between uses, eject the used capsule from your machine
& rinse by pressing the
Double Espresso button
.
3.
If you run out of milk in the
Milk Jug
while dispensing a milk based beverage, press the
selected button to stop frothing. Eject the capsule & replace with a new capsule. Add milk
to the Milk Jug and start the process again with an empty cup or mug.
i.
12.
Summary of Contents for S23
Page 34: ...34 NOTES...
Page 35: ...35 NOTES...
