30
Frame
If your FS200 Vario is stolen, it can be identified by the frame number and the
scannable code. The documentation you receive with your FS200 Vario contains
a section where you can enter the frame number.
You should never ride with a deformed or broken frame. Defective parts must
be replaced by a Ca Go dealer. Continue to use your FS200 Vario only after
such parts have been replaced. If defects of the frame or components are not
repaired, there is a high risk of accidents. If your FS200 Vario does not run
completely straight, this may be due to a warped frame or fork. Please contact
a Ca Go dealer to have the frame and fork checked.
The stay behind the battery safe has a sticker with the number, as well as a
QR code, which is well visible when the battery safe is open. Additionally, the
frame number is embossed on the side of the motor housing.
Suspension
The initial tension of the suspension fork can be configured, within certain
limits, to suit the weight of the vehicle and the intended type of use.
Your Ca Go dealer can do that for you. They can also explain to you how to
adjust the suspension yourself before transporting cargo. As an alternative,
you can always find help in the FAQ section.
You can find more details in the component instructions enclosed with your
FS200 Vario.
The adjustment of any suspension element must adhere to the operating
instructions of the manufacturer. The general rule is that the suspension
element should work significantly when riding over uneven surfaces, but
without ‘bottoming out’, i.e. without moving down all the way until its stop.
Summary of Contents for FS200 Vario
Page 1: ...EN FS200 Vario User manual...
Page 55: ......