CAGSAN MERDIVEN ProTUBE F, Assembly And Use Manuallines

6

EN

tallation.

•  All locking pins are on their actual lo-

cation on the scaffold and are locked.

2.4 Examination, Storage and 

Maintenance

•  ProTUBE Scaffolds parts should be 

carried and transported carefully in 

order to avoid damages.

•  Storage should be organized in a way 

that it will only contain number of 

parts necessary for the correct instal-

lation of ProTUBE Scaffold.

•  All  moving  parts  should  be  checked 

for correct operation and it should be 

ensured that they are not worn.

•  All parts should be checked for da-

mages. Damaged or unsuitable parts 

should not be used.

•  Damaged parts should be returned to 

the manufacturer for examination.

•  It is recommended to examine the 

ProTUBE Scaffolds for professional 

usage by an expert every year.

•  ProTUBE Scaffolds should be exa-

mined again before each usage and in 

emergencies such as a storm.

2.5 Disassembly of ProTUBE 

Scaffolds

ProTUBE Scaffolds should be disas-

sembled by following the assembling 

instructions backwards.

2.6 Relocation of ProTUBE 

Scaffolds

•  The height must be decreased to 

maximum 6 meters in order to move 

ProTUBE Scaffolds.

•  Stabilizers should be lifted maximum 

10  cm  in  order  to  move  ProTUBE 

Scaffolds.

•  Wheeled legs are liberated by lif-

ting the brake pedals. (Diagram 6) 

6

• 

While moving ProTUBE Scaffolds, 

there shouldn’t be anyone and/or any 

material on the scaffold and there 

shouldn’t be any missing compound 

(Diagram 7)

7

•  Environmental  factors  such  as  the 

previously  opened  doors,  windload, 

shades, automatically used sunsha-

des,  electricity  cables  above,  traffic 

and/or the people crossing the road 

etc. should be examined while mo-

ving ProTUBE Scaffolds in order to 

prevent danger.

•  The place of the ProTUBE Scaffolds 

should only be changed lengthways 

or towards cross direction on a surfa-

ce that carries enough flat, horizontal 

and enough load manually.

•  Ensure that ProTUBE Scaffolds does 

not tilt while moving.

•  Right  after  moving  ProTUBE  Scaf-

folds brake pedal should be pushed 

and wheeled legs should be engaged 

and locked.

•  After moving scaffold needs to be ho-

rizontally  aligned  again,  this  should 

be done by using a level.

•  Readjust  all  stabizers  in  a  way  that