CAGSAN MERDIVEN ProTUBE L, Assembly And Use Manuallines

on ProTUBE Scaffolds.

•  Take necessary precautions towards 

the environmental factors to work sa-

fely on ProTUBE Scaffolds.

•  Use extra safety guardrails when nee-

ded for safety and legislation.

•  Never leave ProTUBE Scaffolds wit-

hout someone to take care of it. Pre-

vent  unauthorized  people  to  access 

the scaffold.

•  Anchore the working towers if it is 

unattented.

•  It is forbidden to mix scaffold parts 

of different brands/manufacturers, 

this mixture may cause a danger for 

the safety since load and balance cal-

culation is not made for this mixture 

configuration.

•  The working area around ProTUBE 

Scaffolds should be taken under cords 

by using pins and/or signing straps.

•  You may use lateral feet (supports) 

when there are significant horizontal 

loads, though it is not mandatory for 

under 2.5 m. (It is recommended for 

safe operation.)

•  Ensure the operation of ProTUBE 

Scaffolds is always prioritized.

•  There should be at least 2 people wor-

king on ProTUBE Scaffolds at all ti-

mes (Diagram 5.)

5

MIN.

•  Do not access to platform from outsi-

de. Access to platform from inside use 

trapdoor  to access on the platform

2.3 Check List for Usage of Pro-

TUBE Scaffold

In the first usage or reusage of a ProTU-

BE Scaffold whose installation is comp-

leted, the following should be considered:

•  The product is suitable for usage with 

ProTUBE Scaffolds.

•  ProTUBE Scaffolds allows safe ope-

ration in the immediate vicinity of the 

assembly point.

•  ProTUBE Scaffolds can be used sa-

fely.

•  Surface is horizontal, straight and can 

carry necessary load amount.

•  Environmental  factors  such  as  the 

opening doors, automatically used 

sunshades,  electricity  cables  above, 

traffic and/or the people crossing the 

road etc. shall not cause danger.

•  The area necessary to assemble and 

use of ProTUBE Scaffolds should be 

without barriers.

•  All necessary parts and security tools 

are available on the working area.

•  Damages parts or parts other than tho-

se mentioned shall not be used.

•  ProTUBE Scaffolds is assembled in 

accordance with this handbook and 

configuration table.

•  Maximum installation height is not 

exceeded.

•  ProTUBE Scaffolds is assembled in a 

way that in can be climbed inside.

•  Wheels are correctly placed, aligned 

and brake is applied.

•  Frames are correctly mounted and 

fixed with pins.

•  Horizontal  and  diagonal  braces  are 

correctly mounted and fixed.

•  Lateral feet (supports) are correctly 

mounted.

•  ProTUBE Scaffolds is vertical (check 

by using level).

•  ProTUBE Scaffolds is balanced.

•  Platforms are corrected in right places 

and wind security lock is placed.

•  There are resting platforms with at le-

ast 4 meter distances;

•  ProTUBE Scaffolds compounds 

should be controlled and configurati-

on should be examined in every ins-

5

EN