FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (205) 702-9101.
© 2021 CAHABA. ALL RIGHTS RESERVED.
4
SACHA 71 IN. FREESTANDING ACRYLIC TUB
Installation Instructions
OPTIONAL FAUCET INSTALLATION
1. Locate where you will drill the holes into the acrylic,
and stick masking tape onto that area. This will
prevent the acrylic from chipping.
3
4
2. Drill holes for the faucets on the bathtub at the
desired location.
3. Unscrew the bolts at the bottom of the bathtub using
an adjustable wrench. Carefully take out the top of
the tub and place it on a throw rug or other protective
floor covering to prevent damage to the bath and the
floor.
4. Install the faucets according to the faucets’
manufacturer instructions. Then assemble the top of
the bathtub with the skirt, and secure the bolts at the
bottom as shown in the illustration.
5. Connect the faucet supply lines with hot and cold
water supply. Check for leaks.
NOTE: Verify all pipe connections to ensure no leakage
NOTE: Verify all pipe connections to ensure no leakage
occurs.
occurs.
31 1/2” [800]
3/4” [20]
3 7/8” [100]
19 5/8” [500]
1 5/8” [40
]
3 7/8” [100]
3 7/8” [100]
3 7/8” [100]
2”
[50
]
1” [25]
ø2
”
[ø50
]
