9
Install Strut on outside Gate in the same
manner you installed Strut on Inside Gate.
Lower Gate to closed position, Inside Gate will
rise up to open.
Install the Guards the cover rods on Left Frame using
hardware supplied with Gate.
One Guard installs from the inside the Pallet area.
The other Guard installs from outside the Pallet area.
Install Gate Stop (LH 408701Z,
RH 408702Z) onto Bracket beneath
each Gate.
Use 3/8 x 1.25 Bolt and Lock Nut
Install a Rubber Pad (424357) on each
side of the Left Frame Assembly as
shown to cushion the Gate Stops.
WARNING!
This is the most dangerous step involved in
this installation. Make sure you are Tied-Off
using an OSHA compliant tie-off system.
DISTRIBUTED BY CAI SAFETY SYSTEMS | Phone: (888) 246 6999 | Web: caisafety.com | Email: info@caisafety.com
