Navigation
If you have connected some
options or a
to
, you will notice that the
corresponding sources have been created.
E.g. If a
was detected, a source named “Fog CD” was created and associated with analog connector “An1”.
You can afterwards edit it, or create other ones to match perfectly your system.
MULTI SOLUTIONS
4810/ nITRO
FOG3
FOG3
Navigation
Knob
:
Short push=
(validate an action)
Long push=
(escape)
Rotation=
navigate through a menu, modify a parameter)
Enter
Esc
Navigation
(
Esc
Enter
0.0 dB
Source
SOURCE SETUP
:01 00:00
:CD AUDIO
Goto
0.0 dB
Source
SOURCE SETUP
:CD AUDIO
Goto
:01 00:00
0.0 dB
Source
SOURCE SETUP
:01 00:00
:CD AUDIO
Goto
You can go down
You can go up
Up and down possible
While you navigate, you will see arrows
on the upper left corner of the screen.
It illustrates your position in a menu.
0.0 dB
Source
SOURCE SETUP
:01 00:00
:CD AUDIO
Goto
0.0 dB
Source
SOURCE SETUP
:01 00:00
:CD AUDIO
Goto
Automated source setup
A source setup consists in associating
a name (the name of
the source) with
an audio connector of
.
FOG3
Keep the left button pushed until
you see this screen:
0.0 dB
Source
SOURCE SETUP
:01 00:00
:CD AUDIO
Goto
0.0 dB
Source
SOURCE SETUP
:01 00:00
:CD AUDIO
Goto
Navigate to “Factory settings” menu
You should see:
Make a short push to enter
the menu
“Restore sources”
is highlighted
A confirmation screen
appears:
Just validate by a short push
Select “YES” and validate
by a short push
cairn
