Q u i c k S t a r t
Q u i c k S t a r t
Coupling variation – FuraLED in reflected position of dual port coupling
When configured with an additional transmitted (longer wavelength) channel, the FuraLED coupling is
reflected via a dichroic mirror (typically 400LP). The same adjustments are present for each UV channel,
along with an additional mirror adjustment for both UV LEDs (if required) and X,Y,Z adjustments for the
transmitted channel.
W.White
340nm
385nm
Transmitted LED
X&Y
adjustments
Transmitted LED
focus
adjustment
FuraLED
horizontal
adjustment
FuraLED
vertical
adjustment
1)
Align the 340nm and 380nm channels on the FuraLED as per the previous instructions
2)
Perform any final positional adjustment (moving both UV LEDs equally) via the dichroic mirror
a.
Adjust the
FuraLED horizontal and vertical adjustments
on the dual port coupling.
These may be via blue thumb screws (as in the image above) or using the 1.5mm
allan key supplied with current dual port couplings.
