Page 9
Turning the V1 controller will adjust the
vertical position of the Reflected, and the
Centre images, the remaining image is
the Transmitted image which should be
on the left side, if it is on the right, then
adjust the Split control until the outside
images are exchanged
Adjustments to the V2 controller will
move the Centre image along the
vertical axis, and allow for adjustments
to be made independently of the
Reflected image.
Adjustments to the H3 controller will
move the Transmitted image along the
horizontal axis.
Adjustments to the H2 controller will
move the Centre image along the
horizontal axis.
When the spectrally resolved images are
side by side on the camera chip you are
ready to record. When carrying out
experiments the aperture should be set
to mask the region of interest tightly so
that the images are located as closely as
possible on the camera chip.