6.3 Battery care
1. Disconnect the battery connector if the bike will not be used for more
than 2 weeks.
2. Fully charge the battery before riding, if the bike has not been used for
more than 2 weeks.
6.4 Removing the battery
1. Remove the battery cable from the battery.
2. Use the key to unlock the battery from the battery holder.
3. Loosen the velcro strap and carefully remove the battery.
Note: Humidity may enter through the inlet and permanently damage
the battery. When the battery is not connected to the vehicle or to
the charger; do not store it outdoors.
6.5 Attaching the battery
1. Place the battery in the battery holder.
2. Fasten the velcro strap over the battery handle.
3. Use the key to lock the battery to the battery holder.
4. Attach the battery cable.
Summary of Contents for Makka
Page 1: ...Makka Quick Start Guide...
