Adjusting the saddle angle and/or depth
Tool: Allen key 6mm.
1. Loosen the saddle adjustment screw, see (B) in Fig 27.
2. Adjust the saddle angle and/or depth, see (C) in Fig 27.
3. Tighten the saddle adjustment screw to 10Nm.
8.11 Wheels, tires
Checking the tire depth
Tool: Measuring stick.
Wanted state: Minimum 2mm.
1. Measure the tire depth on the front and rear tires.
2. If necessary, replace the wheel/s, see
Replacing the front wheel and/or
Checking the tire pressure
Tool: Pump with manometer or compressor.
Wanted state: 25 KPA (32 psi) when cold.
1. Unscrew the valve.
2. Attach the tire pressure gauge to the nipple.
3. If necessary, increase the air pressure.
4. Remove the gauge and reattach the valve to the nipple.
Checking that the spokes are firmly attached
Wanted state: Each spoke is firmly attached to the wheel.
1. Manually check for any play on each spoke.
2. If one or more spokes are not firmly attached, contact an authorized
CAKE workshop.
48
Summary of Contents for Makka
Page 1: ...Makka Manual Makka Manual...
Page 62: ......
