background image

5. Charging and Battery 

5.1 Battery 

Be careful, the battery has a high voltage and a high current. Careless handling of 
the battery pack can lead to serious injury or death. 
 
• Always turn the battery off when the battery pack is not installed in the bike or 
connected by the power connector. 
• Never use running water to clean the battery pack. 
• Never drop the battery pack. 
• Never open the battery pack. 
• Never use the battery pack in other applications than what is specified in this 
manual. 
• Never use an un-authorized DC/AC converter. 
• Never short circuit any of the pins or sockets on the battery connectors. 
• Always keep the connector connected to the battery pack when in use. 
 
The ÖSA battery can also be used as a big power bank. You can find USB 
connectors and an automotive 12V connector on the side of the battery pack. The 
maximum discharge power on the USB connectors is 5V/2A (10W). The maximum 
discharge power on the automotive connector is 12V/15A (180W)

.  

 

If you want to use your battery pack to power appliances with a higher power 
rating the separate power converter is required. The power converter is connected 
to the battery main power port and allows you to connect regular 110V/230V 
appliances to its standard sockets. 
 
When disconnecting the battery pack, always turn the battery pack off with the 
pushbutton to make sure there is no voltage on the power pins. A short circuit on 
the power pins can damage the battery pack which will require a service repair. It 
is therefore advised to always keep the battery pack in the bike with the power 
connector attached. 
 
When cleaning the battery pack, NEVER use running water on the battery pack. 
Irresponsible use of the battery could potentially end in a fire which can lead to 
serious damage or even death to people or property. 
 
 

 
 
 
 
 
 

Summary of Contents for OSA Series
















Reviews: