Phantom II
© CalAmp
56
6.0 Configuration
Server Subnet
Not to be confused with the Server Netmask (see below). Enter the
network’s ‘root’ address, e.g. if devices are to be assigned
addresses such as 192.168.1.5 and 192.168.1.6, enter 192.168.1.0
in this field.
Values
192.168.2.0
valid server subnet value for
specific network
Server Netmask
In this field, input the subnet mask which is to be applied to the
network. For basic, small, private networks, a Class C subnet mask
such as 255.255.255.0 could be used.
Values
255.255.255.0
valid subnet mask value for
specific network
Starting Address
This
is the starting (‘lower boundary’) IP address of the range of IP
addresses (also known as
’IP address pool’) to be issued by the
DHCP Server to the applicable devices on the network.
Values
192.168.2.5
IP address as per above
Summary of Contents for Phantom II
Page 160: ...Phantom II CalAmp 160 Appendix E Customer Interface Schematic 1 of 3 ...
Page 161: ...Phantom II CalAmp 161 Appendix E Customer Interface Schematic 2 of 3 ...
Page 162: ...Phantom II CalAmp 162 Appendix E Customer Interface Schematic 3 of 3 ...
Page 164: ...299 Johnson Ave Suite 110 Waseca MN 56093 Phone 800 992 7774 Fax 507 833 6748 www calamp com ...
