4
Installation /
Assemb
ly
Cal Flame Side Burners
LTR20091082, Rev. A
www.calspas.com
Most cities and counties require permits for exterior construction and
electrical circuits. In addition, some communities have codes requiring
residential barriers such as fencing and/or self-closing gates on prop-
erty to prevent unsupervised access to the property by children under
the age of five. Your dealer can provide information on which permits
may be required and how to obtain them prior to the delivery of your
equipment.
We recommend the installation, adjustment and service of your new
side burner be performed by LMS qualified installers and service tech
-
nicians to ensure proper operation and prevent accidents.
When planning your Cal Flame side burner location, access to gas lines
should be considered. The location with the shortest gas line run is
recommended.
When determining a suitable location, consider factors such as expo-
sure to wind, proximity to traffic paths, and windows that open into
the home.
Installation / Assembly
Cabinet Cut-out Dimensions
Your Cal Flame side burner is de
-
signed for easy installation into a
non-combustible enclosure. The
supporting deck or counter must
be flat and level. When determin
-
ing the final location of your side
burner, adequate cross ventila-
tion must be present to prevent
gas from being trapped in the
event of a leak.
The drawings below show the
different types of cabinet cut-out dimensions for side burners.
Model
Description
Width
Depth Height
BBQ08898P Deluxe Single Side Burner
12 1/8”
21 ¾”
7 ¼”
BBQ08899P Deluxe Double Side Burner 12 3/8”
21 ¾”
7 ¼”
BBQ08954P Deluxe Side by Side Burner
25 ¼”
13 ¼”
7 ¼”
WIDTH
DEPTH
HEIGHT
