TABLE OF CONTENTS
Introduction
Parts
Checklist before installation
Door Handing
Installation Procedure
Mark and Drill Door
Change Door Handing
Alignment post location
CRCODE-203 Exploded View
Latch and Spindle Installation
Outside Lock Installation
Inside Lock Installation
Install Strike Plate
Check and Adjust
To Change Access Code
Access Code Recovery
1
2
3
3
3
4
5
6
7
7
8
9
9
9
10
11
Page
Introduction
1. This is a mechanical lock. It does not need a power supply.
2. There are 12 buttons that can be coded: 1 to 0, X and Z. The Y button is only used for setting
the new code. The C button is to clear the buttons if the wrong code is entered.
3. The numbers in the code can be interchanged and does not need to be typed in order.
Password combinations can be from 1-12 digits but 4 to 6 digit codes is suggested for security
purposes.
4.The lock is suitable for door thickness 1
3
/
8
” - 1
3
/
4
”. Choose the appropriate length of screws
according to the door thickness. If the door thickness is out of range, please contact
dealer to get special parts.
7KLVORFNFDQEHLQVWDOOHGRQZRRGDQGPHWDOGRRUV7RLQVWDOORQD¿UHGRRUSOHDVHSXUFKDVH
DFFHVVRULHVQHHGHGIRU¿UHGRRUV
The C button is used as
a clear button when the
wrong code is entered. It
can not be coded.
12 buttons can be coded:
1-0, X and Z
The Y button is only used
to set new codes, it can
not be coded.
n be coded:
only used
s, it can
1
6605 Flotilla St., Commerce, CA 90040
Tel (323) 888-6601 Fax (323) 888-6699
www.cal-royal.com
