manualshive.com logo in svg

Cal Spas 1100 Electronic Series, Owner'S Manual

The Cal Spas 1100 Electronic Series is a luxurious and versatile hot tub offering top-of-the-line relaxation and therapeutic features. Enhance your spa experience by downloading the Owner's Manual for free from our website, where you can find detailed instructions and guidelines tailored to this exceptional product.

Share
Download
background image

Calcium Hardness:

(Hard and Soft Water)

Do Not Use Soft Water When Filling Your Spa   

This is primarily for two reasons.  
1.  Soft water tends to be very unstable.  This means that locking-in pH and Total Alkalinity levels becomes difficult.
2.  Soft water becomes quite foamy with very little turbulence.  No amount of “Foam Gone” will stop it from foaming for very long.

What does this mean?

Your spas water needs to have some hardness to it.. If you live in an area where the water source is soft, you will need to add 1 oz. of
“Liquid Hardness Increaser” to raise water hardness level 7 ppm at a time.  This will make your water more manageable.

Please follow all printed instructions on the bottle and use in very small increments. 

Well Water (Very Hard Water)

In some areas, the water that you have may be very hard (i.e. well water).  If this is so, fill half of the spa with hard water and the other
half with soft water from a water softener.

Metal Protector

(Mineral Control at Start-up)

Your Cal Spas’ Clear Water Plan recommends draining and refilling of your spa every three (3) to four (4) months.  Upon doing so, you
will want to add 3 oz. of Metal Protector to the center of the spa.  Make sure all of the jets are on high speed.

Metal Protector will hold the active minerals in the newly added spa water in a state of “Solution”.  The term solution means that miner-
als in the water are being held in a suspended state, keeping them from bonding to anything in the spa and causing damage. Mineral con-
trol is a critical part of maintaining spa components’ performance and longevity. 

In addition to fill-up protection from minerals, the Clear Water Plan also recommends the weekly maintenance of mineral protection.
This is accomplished by a adding a weekly dosage of Stain and Scale Defense. (See the following page for more information.)

DO NOT USE SPA BRITE OR LIKE PRODUCTS, ON THE SAME DAY YOU ADD METAL PROTECTOR TO THE WATER. Adding
these chemicals on the same day will result in cloudy water.

Stain and Scale Prevention

(Weekly Mineral Control)

As part of your Cal Spas’ Clear Water Plan, weekly protection from minerals are also highly recommended.  Add water to your spa week-
ly, replacing water that has evaporated or spilled over.

Due to water replacement and overall chemical fluctuation, Stain and Scale Defense is an important part of weekly spa maintenance to
prevent minerals from damaging spa components and effecting performance.

Weekly Dosage:

Add 2 oz. of Stain and Scale Defense weekly directly to the center of the spa with all of the jets on high speed.

DO NOT USE SPA BRITE OR LIKE PRODUCTS, ON THE SAME DAY YOU ADD STAIN AND SCALE DEFENSE TO THE
WATER.  Doing so will result in cloudy water.

52

Summary of Contents for 1100 Electronic Series









































































































































































































































































































































Reviews:

No comments

Related manuals for 1100 Electronic Series

Fanstasy Spas MUSE Owner'S Manual preview
MUSE
Brand: Fanstasy Spas Pages: 28
MAAX Spas Powerpool Owner'S Manual preview
Powerpool
Brand: MAAX Spas Pages: 40
Watkins SOLANA TX Pre-Delivery Instructions preview
SOLANA TX
Brand: Watkins Pages: 16
Intex SCL606 Manual preview
SCL606
Brand: Intex Pages: 11
Canadian Spa KELOWNA Owner'S Manual preview
KELOWNA
Brand: Canadian Spa Pages: 14
Canadian Spa MUSKOKA SPA Owner'S Manual preview
MUSKOKA SPA
Brand: Canadian Spa Pages: 24
Gulf Coast Spas LX 11000 Owner'S Manual preview
LX 11000
Brand: Gulf Coast Spas Pages: 52
Jacuzzi Cirrus IG D500000 Owner'S Manual preview
Cirrus IG D500000
Brand: Jacuzzi Pages: 29
Jacuzzi NOVA 536 Specification Sheet preview
NOVA 536
Brand: Jacuzzi Pages: 2
Cal Spas 2008 Gazebos Owner'S Manual preview
2008 Gazebos
Brand: Cal Spas Pages: 52
Invacare TheraPure 3602GXL User Manual preview
TheraPure 3602GXL
Brand: Invacare Pages: 36
Aquatic Serenity 5 AI5AIR6636 Specification preview
Serenity 5 AI5AIR6636
Brand: Aquatic Pages: 1
Aquatic Serenity 11 AI11AIR7240P Specification Sheet preview
Serenity 11 AI11AIR7240P
Brand: Aquatic Pages: 1
Aquatic LUXEAIR 33 MOTIF AI33lUX7242 Specification Sheet preview
LUXEAIR 33 MOTIF AI33lUX7242
Brand: Aquatic Pages: 1
Aquatic MILLENNIUM 10 AI10MIL8248 Specifications preview
MILLENNIUM 10 AI10MIL8248
Brand: Aquatic Pages: 1
Spa Builders SC-CF Service Manual preview
SC-CF
Brand: Spa Builders Pages: 68
Premium Leisure Leisure Edge LE630 Owner'S Manual preview
Leisure Edge LE630
Brand: Premium Leisure Pages: 60
Premium Leisure Sterling Leisure Owner'S Manual preview
Sterling Leisure
Brand: Premium Leisure Pages: 76

Brands by name

Popular brands

Load more brands