manualshive.com logo in svg

Cal Spas 1100 Electronic Series, Owner'S Manual

The Cal Spas 1100 Electronic Series is a luxurious and versatile hot tub offering top-of-the-line relaxation and therapeutic features. Enhance your spa experience by downloading the Owner's Manual for free from our website, where you can find detailed instructions and guidelines tailored to this exceptional product.

Share
Download
background image

Controlling The Total Alkalinity: 

Controlling The Total Alkalinity:

1.  Always follow printed instructions on the bottle and/or packages.
2.  Always adjust Total Alkalinity and Sanitizers first even if it throws the pH further off.
3.  Chlorine users will generally use more “pH / Alkalinity 

Down.”

4.  Bromine users will generally use more “pH / Alkalinity Up.”
5.  Make sure test strips are not wet or outdated prior to testing.
6.  Never test immediately after using oxidizer shock. (Allow 30 minutes of circulation with the spa cover half off prior to testing.)
7.  Always add chemicals when the pump(s) are on high speed.
8.  Always premix “pH Alkalinity Down” chemicals in half a bucket of water prior to introducing them to the spa.
9.  Never attempt to adjust pH or Total Alkalinity in large increments. Adjustments are made easier, and will stay set longer if you make

them in small increments.

You will be using  the same chemicals to lower the pH and Total Alkalinity. (Cal “Spas pH / Alkalinity Down” and “pH / Alkalinity UP.”)

This does create concern with some people of throwing off one level to correct another.

It is recommended to throw off the pH level in an effort to adjust the alkalinity level properly first.  This will make it easier to adjust and
maintain the pH. 

Questions and Answers

Q:   My pH is low and the Total Alkalinity is high.  What do I do?
A:    Add small amounts of “pH / Alkalinity Down” to bring down the alkalinity level first.  Be sure to allow plenty of circulation and

standing time for the waters chemical levels to change.  This may take anywhere from one (1) to three (3) hours depending on the
size of the adjustment. (Smaller adjustment amounts are always better than larger adjustments.) Then you may start adjusting the pH
back up, by using “pH / Alkalinity Up”in small amounts at a time.

Q:   My pH is high and the Total Alkalinity is low.  What do I do?
A:    Add small amounts of “pH / Alkalinity UP” to bring up the alkalinity level first.  Be sure to allow plenty of circulation and standing

time for the waters chemical levels to change.  This may take anywhere from one (1) to three (3) hours depending on the size of the
adjustment. (Smaller adjustment amounts are always better than larger adjustments.)  Then you may start adjusting the pH back
down by using “pH / Alkalinity Down” in small amounts at a time.

Calcium and Scale: 

Calcium is one of the few minerals that does not dissolve in hot water.  In fact, hotter water makes calcium more of a solid, gritty, chalky
substance that attaches itself to the acrylic finish, heater, and everywhere else in the spa.  We refer to these conditions as “Scaling”.  High
pH can also increase the effects of this condition. If left untreated, scaling causes heater, pump, and jet failures; all, of which, are not cov-
ered by the spa warranty.

Prevention and Treatment:
1.   Never allow the spas water temperature to exceed 104˚F.
2.  Check the pH levels and adjust if necessary at least 3 times a week.
3.  Never allow the pH level to exceed 7.8.
4.  Use “Metal Protector” every time you fill your spa. (See printed instructions on Bottle.)
5.  Use “Stain and Scale Defense” weekly as described in the Clear Water Plan.
6.  Applying Cal Spas “Fast Sheen” to the spas acrylic surface when you drain and clean your spa will greatly help your spas finish pro-

tect itself from scale build-up.

Calcium Clean-up:
Unfortunately, there is very little that can help you remove calcium or scale completely in a spa.  Prevention is the key.

Cleaning:
When you drain the spa, clean the surface with Cal Spas “All Purpose Cleaner” and rinse well. 

51

Summary of Contents for 1100 Electronic Series









































































































































































































































































































































Reviews:

No comments

Related manuals for 1100 Electronic Series

Weslo dayBreak 410 User Manual preview
dayBreak 410
Brand: Weslo Pages: 20
InnovaSpa Urbania Standard 110 Owner'S Manual preview
Urbania Standard 110
Brand: InnovaSpa Pages: 19
Jacuzzi Experience ALIMIA Installation Manual preview
Experience ALIMIA
Brand: Jacuzzi Pages: 72
Pro-Form PFSB63131 User Manual preview
PFSB63131
Brand: Pro-Form Pages: 24
Pro-Form MAGNUM PFSB53950 User Manual preview
MAGNUM PFSB53950
Brand: Pro-Form Pages: 24
CalderaSpas UTOPIA GENEVA Owner'S Manual preview
UTOPIA GENEVA
Brand: CalderaSpas Pages: 39
Jacuzzi Mito 5 Specification Sheet preview
Mito 5
Brand: Jacuzzi Pages: 2
Jacuzzi Projecta JP 7 Electrical Diagrams preview
Projecta JP 7
Brand: Jacuzzi Pages: 32
Jacuzzi Milano H546 Specification Sheet preview
Milano H546
Brand: Jacuzzi Pages: 2
Arctic Spas Arctic Ocean Owner'S Manual preview
Arctic Ocean
Brand: Arctic Spas Pages: 32
Westerbergs Arum Installation Instructions And User Manual preview
Arum
Brand: Westerbergs Pages: 31
Westerbergs deluxe 2.0 User Manual preview
deluxe 2.0
Brand: Westerbergs Pages: 44
Westerbergs Falsterbo Installation Instructions And User Manual preview
Falsterbo
Brand: Westerbergs Pages: 85
ProForm Storm PFSB63130 User Manual preview
Storm PFSB63130
Brand: ProForm Pages: 24
GALAXY SPAS Ara I Manual preview
Ara I
Brand: GALAXY SPAS Pages: 41

Brands by name

Popular brands

Load more brands