manualshive.com logo in svg

Cal Spas 1100 Electronic Series, Owner'S Manual

The Cal Spas 1100 Electronic Series is a luxurious and versatile hot tub offering top-of-the-line relaxation and therapeutic features. Enhance your spa experience by downloading the Owner's Manual for free from our website, where you can find detailed instructions and guidelines tailored to this exceptional product.

Share
Download
background image

Cloudy Water: 

Cloudy Water:

Everyone experiences cloudy water at one time or another.

The number one cause of cloudy water is the spa user and the things they bring into the spa.  As discussed before, the average spa holds
only 350 gallons of water.  What you bring into the spa will stay in the water for some time.  Think of the spa as a thorough body wash.
Everything that is in your clothes, skin and hair will be washed off and left in the spa water causing cloudy water. 

1.  Never wash the clothes that you wear into the spa in laundry detergent or fabric softener. Laundry detergent and fabric softener stays 

in your clothes  no matter how well you rinse them.  This causes cloudy and foamy water that is almost impossible to clean up.  The 
only thing you can do is wait for it to filter out.  Adding Spa Brite, in this case, will only further delay the spas ability to clear up.

2.

Never enter the spa with sunscreen or lotion on your skin.  Oil is very difficult to remove from the water, and can cause a reaction
with some of the chemicals that you may add to your spa, further causing a cloudy water condition.  It is best to rinse off prior to
entering the spa.

3.

Use caution when adding any chemicals to correct a problem.  Most cloudy water problems are made worse by the spa owner adding
chemical after chemical to correct a cloudy water problem that normally would have cleared up with a little Oxidizer Shock and fil-
tration time.

4.

Remember, swimming pool chemicals are completely different than spa chemicals.  Entering a spa with wet clothes from a 
swimming pool can cause a possible chemical reaction to either the spa user and/or the spa water.  Always rinse thoroughly when
transferring between a swimming pool and a spa. 

5.  Clean the spas filter(s) regularly as described in the Cal Spas Clear Water Plan.

Spa Brite: (Water Clarifier)

Spa Brite:

This chemical is used to help clear up cloudy water.  
The problem that most spa owners run into is being able to identify when Spa Brite should be used and when it should not be used.

Spa Brite’s only purpose is to draw very light debris together and making them large enough to be caught in the filter. 

If your water clarity issue is caused by excessive amounts of oils, soap, or bacteria elements, Spa Brite will only add to the clarity prob-
lem;  an oily, clumpy mess will form around the entire water level of the spa.

How to use Spa Brite:

1.

Make sure that your clarity issue is not of an oily, soapy, or bacterial nature. (See Filter, Enzyme Oil Gone, or Oxidizer Shock 
sections for these issues.)

2.  Add 2 oz. of Spa Brite to a spa running on filter  speed.  Allow spa to filter until water is clear.  We recommend placing your spa in 

filter mode “FC” (24Hour filtration Mode) during this time. (This may take some time, so be patient.  See the Setting Filtration 
Cycles section in your owner’s manual.)

3.

Clean filter thoroughly between, and after each application of Spa Brite.

48

Summary of Contents for 1100 Electronic Series









































































































































































































































































































































Reviews:

No comments

Related manuals for 1100 Electronic Series

Conair Dual Jet BATH SPA Cordless BTS4C Instruction Booklet preview
Dual Jet BATH SPA Cordless BTS4C
Brand: Conair Pages: 10
mspa M-001LS Nest Owner'S Manual And Warranty preview
M-001LS Nest
Brand: mspa Pages: 24
Aquatic AI6642RC48 Specification Sheet preview
AI6642RC48
Brand: Aquatic Pages: 1
JNJ SPAS SPA-301 Owner'S Manual preview
SPA-301
Brand: JNJ SPAS Pages: 16
Jacuzzi BELLAVISTA 5 Specification Sheet preview
BELLAVISTA 5
Brand: Jacuzzi Pages: 2
Marquis Everyday Hot Tub Owner'S Manual preview
Everyday Hot Tub
Brand: Marquis Pages: 29
Watkins Wellness HotSpring Hot Spot SX Owner'S Manual preview
HotSpring Hot Spot SX
Brand: Watkins Wellness Pages: 108
KBL MegaSun K7S Operating Instructions Manual preview
MegaSun K7S
Brand: KBL Pages: 56
Jacuzzi Proclear Owner'S Manual preview
Proclear
Brand: Jacuzzi Pages: 3

Brands by name

Popular brands

Load more brands