manualshive.com logo in svg

Cal Spas 1100 Electronic Series, Owner'S Manual

The Cal Spas 1100 Electronic Series is a luxurious and versatile hot tub offering top-of-the-line relaxation and therapeutic features. Enhance your spa experience by downloading the Owner's Manual for free from our website, where you can find detailed instructions and guidelines tailored to this exceptional product.

Share
Download
background image

Multi-Purpose Cleaner

(Spa finish cleaning)

Cal Spas’ Multi-Purpose Cleaner is an essential part of maintaining your spas finish.  Through normal use, the spa’s finish can accumulate
dirt, oil, and calcium causing a rough feel and unsightly scum lines.  Cal Spas’ Multi-Purpose Cleaner is a low detergent, non-abrasive
cleaner specifically formulated to clean the spa without damaging its acrylic finish. The most effective solution to minimize cleaning time
is prevention.  When the following steps are followed, the spas finish will actually start to resist most of the elements that cause calcium
build-up and make scum line cleanup easier: 

Prior to Spa Start-up and Refilling:

1.   Spray Cal Spas’ Multi-Purpose Cleaner directly to the spas finish.
2.  Wipe clean with a clean soft cloth.
3.   Repeat on heavily calcified areas.
4.   Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.
5.   Allow spa to dry completely.
6.  Apply a coat of Cal Spas’ Fast Sheen to the spa entire finish with a soft cloth or sponge.
7.   Allow Fast Sheen to dry until white and powdery.
8.   Buff clean with a soft cloth, rotating frequently.

Periodic Maintenance:

1.   Spray Cal Spas’ Multi-Purpose Cleaner directly to the spas finish.
2.  Wipe clean with a clean soft cloth.
3.   Wipe spa thoroughly with a wet sponge, rinsing often in a 

bucket of clean water.

Use of Cal Spas’ Multi-Purpose Cleaner:

Cal Spas’ Multi-Purpose Cleaner should not be spayed directly into the spa water.  Incorrect product usage may cause water clarity issues.

Fast Sheen:

(Spa finish protecting wax)

Cal Spas Fast Sheen is an essential part of maintaining your spas finish. Through normal use, the spas finish can accumulate dirt, oil, and
calcium causing a rough feel and unsightly scum lines.  

Cal Spas Fast Sheen is a non-oil based wax that is specifically formulated to protect the spas finish from the chemicals and minerals asso-
ciated with normal spa use.

The most effective solution to minimize cleaning time, is prevention.  When the following steps are followed, the spas finish will actually
start to resist most of the elements that cause calcium build-up and make scum line cleanup easier: 

Prior to Spa Start-up and Refilling:

1.  Spray Cal Spas’ Multi-Purpose Cleaner directly to the 

spas finish.

2.  Wipe clean with a clean soft cloth.
3.  Repeat on heavily calcified areas.
4.  Wipe spa thoroughly with a wet sponge, rinsing often in a 

bucket of clean water.

5.  Allow spa to dry completely.
6.  Apply a coat of Cal Spas’ Fast Sheen to the spa’s entire 

finish with a soft cloth or sponge.

7.   Allow Fast Sheen to dry until white and powdery.
8.  Buff clean with a soft cloth, rotating frequently. 

Important:

Cal Spas Fast Sheen should not be used on spas full of water.  Only apply to a clean, cool, dry surfaces.  Incorrect product usage may
cause water clarity issues. 

54

Summary of Contents for 1100 Electronic Series









































































































































































































































































































































Reviews:

No comments

Related manuals for 1100 Electronic Series

Jacuzzi Aura Installation Manual preview
Aura
Brand: Jacuzzi Pages: 40
ProForm PFSB62830 User Manual preview
PFSB62830
Brand: ProForm Pages: 20
Aquatic AI12AIR7240 Specification Sheet preview
AI12AIR7240
Brand: Aquatic Pages: 1
Watkins C30S Owner'S Manual preview
C30S
Brand: Watkins Pages: 32
Bestway Lay-Z-Spa Owner'S Manual preview
Lay-Z-Spa
Brand: Bestway Pages: 340
Jacuzzi Duetta 6042 Specification Sheet preview
Duetta 6042
Brand: Jacuzzi Pages: 2
Jacuzzi Corian Aura Corner 140 Installation Manual preview
Corian Aura Corner 140
Brand: Jacuzzi Pages: 12
Caldera Makena Owner'S Manual preview
Makena
Brand: Caldera Pages: 44
CalderaSpas HIGHLAND Series Owner'S Manual preview
HIGHLAND Series
Brand: CalderaSpas Pages: 16
Canadian Spa Erie SE Spa KH-10130 Owner'S Manual preview
Erie SE Spa KH-10130
Brand: Canadian Spa Pages: 15
Jacuzzi Tara Pure Air II Bath EB10 Specification Sheet preview
Tara Pure Air II Bath EB10
Brand: Jacuzzi Pages: 2
Jacuzzi Amiga BE30-LH Specification Sheet preview
Amiga BE30-LH
Brand: Jacuzzi Pages: 2
European Touch sogno dreamwave Owner'S Manual preview
sogno dreamwave
Brand: European Touch Pages: 39
Jacuzzi Z10/301 Owner'S Manual preview
Z10/301
Brand: Jacuzzi Pages: 16
Jacuzzi Tirage Plus 8900000 Owner'S Manual preview
Tirage Plus 8900000
Brand: Jacuzzi Pages: 23
Morphy Richards IBPC4006 Instruction & Styling Manual preview
IBPC4006
Brand: Morphy Richards Pages: 2
Morphy Richards IB25018 Instructions preview
IB25018
Brand: Morphy Richards Pages: 2
SCS Industries Portable and In-Ground Spas Operating Manual preview
Portable and In-Ground Spas
Brand: SCS Industries Pages: 18

Brands by name

Popular brands

Load more brands