Water Quality Maintenance
Page 58
2006 Portable Spa Owner's Manual
LTR20061000, Rev. A
Maintenance
Regardless of which “Clear Water Plan” you are using, you should also do the following:
Every Month
1.
Deep clean your spa’s filter. (Follow “filter cleaning” instruction at beginning of “Clear Water Plan”)
2.
Check inside the equipment area for leaks, rodents, and insects.
3.
If a leak is discovered, contact your Cal Spas dealer for service.
4.
If you see evidence of rodents or insects, take necessary actions to remove them and precautions to
prevent them from returning.
Every 3 To 4 Months
1.
Drain and clean your spa with “Multi-Purpose Cleaner”.
2.
Polish the acrylic surface with “Fast Sheen”.
3.
Clean and treat spa cover, pillows, and Cal Select cabinet (if equipped) with “Cover Protector”.
4.
When re-filling your spa, follow your specific “Clear Water Plan” Start Up procedures.
5.
If you are using the Cal Clarity Automatic Bromine Generator Clear Water Plan, don’t forget to add new
TRU BLU sodium bromide to the water.
6.
If you use the Cal Inline Sanitation System “Clear Water Plan”, don’t forget to replace the Mineral and
Bromine Cartridges.
Once A Year
1.
Clean and treat redwood spa cabinets and gazebos with “Nu-Spa Redwood Stain Renew and Brightener”.
2.
If you use the Cal Zone Quest 2000 Ozonator, you will need to replace the ozone cartridge.
3.
Check the filter cartridge pleats. If they are frayed, replace the cartridge.
